Heritage Briton II Head & 2x12 Cab / Black

A head version of the Briton with a 2nd channel, and global master volume control, in place of the reverb circuit found in the combo version. The 2nd channel is voiced along the lines of a classic English 18 watt design with the added feature of being used as an FX loop circuit for channel 1. The two channels can be used on their own or blended together for a variety of tones and textures.

Control Panel:

Channel 1:

Bright Switch:A three position switch which, in conjunction with the treble and cut controls, allows the player to tune the treble frequencies to better match the type of guitar and pickup position used.The middle position is "off". The lower switch setting is a little brighter, while the higher setting is very bright.This can be just the thing to add life and sparkle to a dark neck pickup.

Volume: Controls the volume/gain for Channel 1

Treble: Adjusts the amount of high frequencies for Channel 1

Middle: Adjusts the amount of mid frequencies for Channel 1

Bass: Adjusts the amount of low-end frequencies for Channel 1

Channel 2 / FX Return:

Volume/ FX Level: Controls the volume/gain of Channel 2. When this channel is used as the FX loop for channel 1 this control becomes the FX loop return level control. The processed signal is blended into the dry signal, which remains intact.The effects processor should be set for a pure wet signal.

Tone: A unique tone control that can brighten or darken the sound of the channel and works independently of volume knob settings. This will also effect the channel when used as the FX loop, allowing EQ-ing of the processed signal.

Cut: Reduces high frequencies in the power amp section. This will smooth out and darken the overall tone. This control operates for both channels.

Master: Post phase inverter Master Volume control that operates with both channels.

Back Panel:

Channel 2 Input / FX Return: Channel 2 is wired to the input jack on the front of the amp allowing both channels to be used at the same time. When this input is used the connection is broken allowing the two channels to be used separate. An ABY box can be used to select between the two channels, or combine them. When being used as an FX loop this becomes the FX Return jack. The output of the effects processor is connected to this jack.

FX Send jack: The input of the effects processor is connected to this jack

FX Send Level: Adjusts the signal level sent to the effects processor. The level should be adjusted so as not to overload the input of the effects unit.

Speaker jacks: 8 and 16 ohm. The speakers in the Briton extension cabinet are wired for 16 ohm.

Fuse: 3 Amp fuse housed within the detachable AC power connector

Head Cabinet Dimensions and Specs: Birch ply cabinet, Width: 23.25" x Height: 9" x Depth: 10.25". The Briton II comes standard in black. Please see our vinyl and grille cloth section for custom colors.

Speaker Cabinet: 2x12 open back, pine cab. Width: 28" x Height: 20"x Depth: 11.25". The cab is loaded with 2 Celestion Blue Alnico speakers, wired in series for 16 ohm. The combined wattage of the speakers is approx. 30 watts. This cab should not be used with any of our amps over 30 watts.

Details


Condition	New
Cat#:	8046
Price:	AU$4,900.00

Options

Quantity

Add to cart

Add to wish list